foam analysis
英 [fəʊm əˈnæləsɪs]
美 [foʊm əˈnæləsɪs]
起泡分析
双语例句
- On the dynamics of the real estate foam: an analysis by behavior economics
房地产泡沫的形成机理&基于行为经济学视角的分析 - Foam drainage time Application analysis of low-yield wells foan drainge gas prodution technology
泡沫析水时间析出水分的时间低产气井泡沫排水采气技术应用分析 - The foam flow pattern is not amenable to theoretical analysis and has not been the subject of any extensive experimental study.
泡沫流型还没有经得起考验的理论分析可循，也没有广泛的实验研究报导。 - Study of plant tannin extract modified phenolic foam for exterior wall external insulation The analysis of the cause for block-up in the desulfuration toner and raises some counte measures
外墙外保温用栲胶改性酚醛树脂泡沫的研究栲胶法脱硫堵塔原因分析及预防措施 - Simulation on the Effective Thermal Conductivity of Porous Ceramic Foam and Analysis of Experimental Method
多孔陶瓷材料热传导性能模拟计算与测试方法研究 - Heat Treatment of Waste PU Foam and Its Products Detection and Analysis
废聚氨酯硬泡热处理特性及产物检测分析 - Microcellular Foam Plastics Molding and the Geometrical Frame Analysis on Nucleation Nozzle
微孔塑料成型及成核喷嘴几何结构的分析 - The compression test and real-time CT analysis on the foam aluminium with the real-time synchrotron radiation CT system for material analysis constructed based on this device was conducted, which proved the reliability of the device.
用以该装置为核心设备所组建的材料拉压加载试验实时同步辐射CT分析系统对泡沫铝进行的压缩和CT实时分析试验初步表明，该装置是可靠的。 - The thermodynamic parameters of polyurethane foam plastic ( PU) at different temperatures and frequencies are measured by Dynamic Mechanical Analysis ( DMA) equipment.
采用动态机械分析（DMA）仪，测试组合聚醚型聚氨酯泡沫塑料在不同温度、不同频率下的动态力学参数。 - The structure and properties of these rigid polyurethane foam were studied by using gel-permeation chromatography. thermo-gravimetric analysis and stress-strain analysis.
以凝胶渗透色谱、热重分析及应力-应变分析等方法对MPAE的分子量分布和由它制得的硬质聚氨酯泡沫塑料的性质进行了研究。 - An experimental investigation on the flow and heat transfer characteristics for aluminum foam a computational simulating analysis of working processes of Stirling cycle refrigerator
泡沫铝翅片传热和流动特性的实验研究斯特林循环制冷机热力传热和流动过程的模拟分析 - The rheologic model of three-phase foam drilling fluid can be optimized with grey correlation analysis method.
三相泡沫钻井液流变模式可通过灰色关联分析法进行优选。 - On the Foam Sizing Study on Load Case and Static Analysis of Crush Teeth for Advanced Sizing Machine and Its FEM
泡沫上浆的研究新型双齿辊破碎机辊齿受力工况及其有限元 - Technology of Producing Aluminium Alloy Foam by Low-Pressure Infiltration Method and Analysis of Common Defects
泡沫铝的低压渗流工艺及常见缺陷分析 - Foam glasses have sound function of heat insulation. According to the thermal analysis, construction technique and rational design, the foam glass will be the best choice of energy saving building
泡沫玻璃具有良好的保温隔热性能，根据热工分析及施工工艺的研究，再配以合理的保温结构设计，泡沫玻璃将成为建筑节能材料的极佳选择 - The abstract; Concentrates the atomic absorption law analysis in the foam plastics to measure the earnest money in the practical application, carries on the beneficial discussion to this analysis determination method certain technical questions.
在泡沫塑料富集原子吸收法分析测定金的实际应用中，对该分析测定方法的若干技术问题进行有益探讨。 - Nucleation Model of Plastics Foam: Analysis and Computer Simulation
塑料发泡成核过程分析与模拟计算 - This paper dealt with the mechanical behavior of sandwich beams composed of aluminum foam core and metallic face sheets under cyclic bending by in-situ Surface Displacement Analysis Software.
应用表面位移原位分析技术对由泡沫金属铝芯和金属面板组成的三层复合板在循环弯曲载荷条件下的损伤行为进行了观察和研究。 - Sodium dodecylsulfate ( SDS) was purified with foam separation method, its purity was confirmed by IR, melting point measurement and the curve of γ lg c analysis.
用泡沫分离法，纯化了十二烷基硫酸钠（SDS），并通过红外光谱、熔点测定、表面张力-表面活性剂浓度的对数（γ-lgc）曲线的分析，确证了SDS的纯度。 - The mechanism of in-situ cyclization is discussed. MAA/ AN and its foam are characterized by infrared adsorption spectrum, polarizing microscope and differential thermal analysis, and the mechanical properties and heat-resistance of MAA/ AN foam are studied.
探讨了原位成环的机理，采用傅立叶红外光谱仪、热台偏光显微镜和差示扫描量热仪对MAA/AN及其泡沫塑料进行了表征，研究了MAA/AN泡沫塑料的力学性能和耐热性能。 - The thermally stable capability and mechanical property of the deuterated foam above were analyzed by the differential scanning calorimetry ( DSC), dynamic mechanical analysis ( DMA), stress-strain behavior analysis, and other methods.
采用差式扫描量热法（DSC），动态机械性能分析仪（DMA），及万能材料机等分析测试方法对制得的氘代低密度聚苯乙烯泡沫的热性能和力学性能进行了表征分析。 - Besides the complex plywood to be prepared by polyurethane foam taking as the core layer, and also the test measuring analysis had done for the absorbing and sound insulation.
另外，还制备了以聚氨酯泡沫为芯层的复合板材，并对它们的吸隔声性能进行了测试分析。 - On this basis, we use foam sandwich instead of original honeycomb structure sandwich and make finite element analysis.
在此基础上，使用泡沫夹层代替原结构中使用的蜂窝夹层进行了有限元分析。 - Identification of foam cells: cholesterol content was tested by oil red O staining and oxidase methods, then make conduct qualitative and quantitative analysis of foam cells. 3.
泡沫细胞鉴定，利用油红O染色和氧化酶法细胞内胆固醇含量的测定，进行泡沫细胞定性和定量分析。 - Finally, this thesis concentrated on situation, modified research, development and application of domestic and foreign manufacturers of phenolic foam analysis statements. 2.
最后，本文针对酚醛泡沫的概况、改性研究、发展应用以及国内外生产企业进行了分析陈述。 - The thesis analyzes the development in the world of the compressed air foam fire extinguishing system, and further makes control system functional requirements analysis, on this basis, it has got the overall control system design, and system hardware and software design.
论文分析了压缩空气泡沫灭火系统的国内外发展现状，对其控制系统进行了功能需求分析，在此基础上给出了控制系统的整体设计方案，并进行了系统软硬件的设计。